Explanation:
- Install the PoE port injector on the ethernet line between your router and the phone. The cable that is plugged into the side that is pictured below is the one that needs to go to your router. The other side is connected to your phone. TIP: It does not matter where in the line the PoE injector is. It just needs to be in line so that it can provide your phone power. If you have AC power to plug in the power for the PoE injector nearer to your router you can choose to use the short cable router to the PoE Injector and the longer cable PoE Injector to phone. Or you can do it the other way around.
- Plug the cable from the PoE Injector into the Network port on the back of the phone. If all is connected correctly, the phone will power up.